Products

Servo motors

Servos are used in radio-controlled airplanes to locate control surfaces like rudders, operating grippers, elevators, walking a robot etc. Servo motors are small in size, have good power and built-in control circuitry.

The servo motor is genuinely an assembly of a control circuit, a gear reduction unit, normal DC motor and a position-sensing device. The DC motor is coupled with a gear mechanism which assign feedback to a position sensor which is mostly a potentiometer. From the gear box, the output of the motor is passed via servo spline to the servo arm. For high power Servo Motors, the gear consists of Metal whereas for Standard Servo Motors, the gear is usually composed of plastic.

Damper

A Damper is a valve or plate that ceases or controls the flow of air inside a chimney, air handler duct, VAV box, or other air-handling equipment. A Damper may be used for climate control, to regulate it for room-by-room temperature or to cut off central air conditioning (heating or cooling) to an unused room.

The operation of a Damper can be Manual or Automatic. Manual dampers are spinned by a handle on the outside of a duct. Automatic dampers are used to balance airflow ceaselessly and are operated by electric or pneumatic motors, in turn controlled by a thermostat or building automation system.

Sometimes there are chances that the Solenoids control Automatic or motorized dampers and the degree of air-flow calibrated. To effect the climate control, the signals are sent from the Damper to the Actuator to balance the flow of air-conditioned air.

Actuator

An Actuator is an element of machine that is liable for mobility or controlling a mechanism or system. An Actuator requires a source of energy to control signal which is having relatively low energy like pneumatic or hydraulic pressure, an electric voltage or current, or even human power. When an Actuator receives a control signal, it reciprocates by transforming the signal's energy into mechanical motion.

An Actuator is the procedure by which a control system has effect on the environment. The Eclipse Programmable Rotary Actuator is a keypad which is customized and directly coupled, regulating the motor for use in burner and valve control systems. The Actuator is generally used with an electronic control to manage a process temperature.

Potentiometers

Potentiometer is a voltage divider measuring instrument specifically used for measuring electric voltage. To manage the volume on audio equipment, the electrical devices like Potentiometers are often used.

Potentiometers performed by a process can be used as position transducers. Potentiometers are hardly used to directly control exceptional power (more than a watt). This power degenerated in the potentiometer would be equivalent to the power in the controlled load.

A potentiometer is a three-terminal dissentient with a revolving connection which forms an mobile voltage divider. In a Potentiometers, if only two terminals are used I.e. one end and the wiper, the Potentiometer acts as a fluctuating resistor or dimmer.

Burner

An Burner is a machine-like equipment which uses gas or liquid fuel to produce flames in a restrained way. Burner needs to execute some mandatory functions which includes distribution of Air, Fuel and Combustion control, fuel preparation etc.

Burner is a part of Laboratory device which produces a single open gas flame, used for heating, sterilization, and combustion. The gas produced may be a natural gas or a liquefied petroleum gas like propane, butane, or a combination of both.

Types of Burners:
1. Gas burner
2. Coal Burner
3. Oil Burner